The X1 Pro brings full-constellation centimetre-level RTK to versatile fieldwork with a 1.1″ large HD color screen for clear status checking and easy configuration. A 1408-channel engine, 60° IMU tilt support and hybrid 4G/UHF correction keep crews productive across demanding sites, while the 6700 mAh battery runs over 20 hours in a rugged IP68 body weighing just 870 g. Supplied as a Base & Rover set.
The 1408-channel engine tracks every major constellation with tough signal capture and strong anti-interference. An advanced RTK algorithm turns that into a stable fixed position in just a few seconds — including under tree canopy, in city canyons and around reflective surfaces where multipath usually slows work down.
For the convenience of users, the X1 Pro carries a 1.1-inch large HD color screen for clear status checking and easy configuration directly on the receiver — no controller needed just to see what the unit is doing.
A new-generation IMU initializes in about five seconds and keeps measuring at tilts up to 60°. One initialization holds the manufacturer’s stated 2.5 cm accuracy for the entire job, so the pole rarely has to be perfectly plumb on difficult points.
Built-in 4G and internal UHF give the X1 Pro two paths for correction data. In optimal conditions it reaches up to 15 km in enhanced internal UHF mode, 20 km with an external radio, and over 50 km via internal GSM or PDA CORS mode.
A 6700 mAh internal battery delivers over 20 hours of continuous operation. Three hours of Type-C fast charging gets you back to work, and a power bank enables charging on-the-go between setups.
The X1 Pro is the screened member of the X1 series: it adds a 1.1″ large HD color screen for on-receiver status and configuration on top of the X1’s full-constellation RTK, built-in 4G, internal UHF and 6700 mAh battery. It is distinct from the X1 (no screen) and the X1 Lite (no internal 4G modem or SIM slot). Supplied as a Base & Rover set.
The X1 Pro supports both 4G and radio correction data transmission, so you can choose the mode that fits each site. Ranges are qualified by the manufacturer and depend on field conditions.
Enhanced Internal UHF
Under optimal conditions
External Radio Mode
With external radio
Internal GSM / PDA CORS
Via network correction
From cadastral boundaries to construction staking, the X1 Pro delivers reliable centimetre-level accuracy wherever your project takes you.
Download the product specifications as a PDF.
Authorized & Exclusive SingularXYZ partner for the UAE and Pakistan. Request a quote or message us on WhatsApp for pricing and availability.
